pro power steering

Jaguar XF X260 Electric Steering Rack Repair & Reconditioned Racks

Jaguar XF X260 RHD Electric Steering Rack Specialists

Pro Power Steering repairs and reconditions suitable Jaguar XF X260 electric power steering racks and supplies correctly matched reconditioned RHD replacement racks for customers and garages across the UK.

This page covers the second-generation XF X260, not the earlier hydraulic-steering XF X250. RWD or AWD specification, production date, VIN, symptoms, diagnostic codes and every number on the original rack are needed before compatibility is confirmed.

Request a Jaguar XF X260 EPS Rack Quote

Send the registration or VIN, model year, engine or powertrain, RHD confirmation, exact dashboard message, complete diagnostic codes including suffixes, and clear photographs of every number on the original steering-rack label.

Repair your original rackThe unit is identified and assessed for electronic, mechanical, corrosion and housing damage before repair or reconditioning is agreed.
Buy a replacement rackCorrectly matched reconditioned Jaguar XF X260 RHD electric racks can be supplied for suitable applications.
Supply, fitting and deliveryWorkshop fitting, UK collection and delivery can be discussed, together with initialisation, calibration and wheel alignment where required.

Jaguar XF X260 RHD Steering Rack Years and Variants

The X260 XF introduced electric power-assisted steering to the second-generation XF range. The original and 2021-model-year updated vehicles can use different hardware and software revisions.

Vehicle group Typical UK period Steering system Important check
XF X260, original / pre-facelift 2016–2020 Electric power-assisted steering; RWD and AWD variants VIN, drivetrain, full T2H/GX/HX/JX label and rack configuration
XF X260, updated model 2021–2024 Electric power-assisted steering with later electronics/software Production date, powertrain, software level and complete original label

Compatibility warning: model year or one part number is not enough to guarantee interchange. We confirm supply only after checking the VIN, drivetrain, production date, full suffix and photographs of the original RHD rack.

Jaguar XF X260 RHD Electric Steering Rack Part Numbers

The following numbers are identification and cross-reference candidates encountered on applicable units. They are not a promise that every listed rack interchanges.

Common X260 RHD label groups

Cross-reference candidates include HX63-3504-BA/BC, JX73-3504-DB/DD and MX73-3504-DB/DD, together with their corresponding 3200-format engineering numbers.

Jaguar service-number cross-references

Numbers reported across related RHD applications include T2H18329, T2H19685, T2H37028, T2H47059, T2H37954 and T2H47061. Production date, drivetrain and suffix must be checked before any interchange is stated.

Why the complete label matters

Similar-looking X260 and XE racks can have different length, mounting, steering ratio, electronics or software. A partial number or model name is not enough.

Always record both formats: a rack may show a 3200 engineering number, a 3504 assembly number and a separate Jaguar service number. Every suffix matters.

Common Jaguar XF X260 Electric Steering Rack Faults

  • Water ingress and electronic corrosion
  • Loose or damaged electric-motor attachment
  • Intermittent or complete loss of assistance
  • Heavy steering at low speed
  • Power-steering or stability warnings
  • Rattle over cobblestones or damaged roads
  • Knocking, grinding, groaning or whining
  • Mechanical play without a diagnostic code
  • Steering-angle or calibration concerns
  • Incorrect rack fitted from a similar application

A noisy, loose, corroded or mechanically damaged rack may not store a fault code. A warning or communication code can also be caused by low voltage, network, calibration or software problems, so physical inspection and a complete diagnostic scan are both important.

Verified Jaguar bulletin example

Jaguar bulletin JTB00477 describes a defined group of 2016–2017 XF X260 vehicles with a low-to-moderate-speed rattle over rough roads caused by bearing clearances in the steering rack. The bulletin is VIN and market specific, so the symptom still needs proper inspection and identification.

XF X260 Fault Codes, Warnings and Correct Diagnosis

Provide the complete code including its suffix and the control module in which it was stored. There is no single universal code that proves the rack has failed across every XF X260 year and specification.

Electrical and network checks

Check battery and charging voltage, power and earth supplies, network integrity, PSCM communication and related modules before condemning the rack.

Mechanical and water-damage checks

Inspect for noise, free play, cracking, loose motor attachment, water ingress, corrosion and rack-bar or bearing damage even where the scan report is clear.

How XF X260 Rack Repair, Reconditioning and Supply Works

1

Identify

We check the VIN, year, powertrain, RHD specification, symptoms, codes and original label.

2

Assess

The rack is inspected for electronics, cracking, corrosion, water damage and mechanical condition.

3

Repair or Replace

We agree repair or reconditioning where suitable, or quote a correctly matched reconditioned replacement.

4

Fit and Initialise

Workshop fitting or UK delivery can be arranged. Initialisation, calibration and alignment are checked as required.

Information Needed for an Accurate XF X260 EPS Quote

Vehicle details

  • Registration or full VIN
  • Model year and production date where known
  • Engine or powertrain and RWD/AWD specification
  • UK right-hand-drive confirmation

Rack and diagnostic details

  • Clear photographs of every label and part number
  • Exact dashboard warning message
  • Complete fault codes, suffixes and control modules
  • Description of noise, play, water ingress or loss of assistance

Jaguar XF X260 Electric Steering Rack FAQs

Can you repair my original XF X260 rack?

Often, yes, provided the electronics, housing and mechanical components remain suitable. We inspect the unit before confirming repair or reconditioning.

Can I buy a reconditioned XF X260 rack?

Yes. Correctly matched RHD reconditioned replacement racks can be supplied for suitable applications, with workshop fitting or UK delivery available.

Is this page for the earlier XF X250?

No. The X260 uses electric steering, while earlier X250 applications are generally hydraulic and require a different identification and repair route.

Does one T2H or engineering number confirm fitment?

No. The complete suffix, VIN, RWD/AWD specification, production date and original rack label must be compared.

Will an XF replacement rack need initialisation?

Usually some form of initialisation or calibration should be expected. Steering-angle, ADAS and wheel-alignment requirements depend on the vehicle and work completed.

Discuss Your Jaguar XF X260 RHD EPS Rack

Send the registration or VIN, complete rack numbers, fault codes and clear photographs so we can identify the correct repair or replacement option.