Jaguar F‑TYPE X152 Electric Steering Rack Repair & Reconditioned Racks
Jaguar F‑TYPE X152 RHD Electric Steering Rack Specialists
Pro Power Steering repairs and reconditions suitable Jaguar F‑TYPE electric power steering racks and supplies correctly matched reconditioned RHD replacements for coupé and convertible applications.
Not every X152 uses the same steering system. Early cars used hydraulic assistance, while EPAS became standard across the range for the 2016 model year. Model year, production date, RWD or AWD specification, powertrain and the complete original rack label must be checked.
Request a Jaguar F‑TYPE X152 EPS Rack Quote
Send the registration or VIN, model year, engine or powertrain, RHD confirmation, exact dashboard message, complete diagnostic codes including suffixes, and clear photographs of every number on the original steering-rack label.
Jaguar F‑TYPE X152 Steering Systems, Years and Variants
The most important first step is confirming whether the car has the early hydraulic rack or the later electric power-assisted steering rack. They are not interchangeable service routes.
| Vehicle group | Typical UK period | Steering system | Important check |
|---|---|---|---|
| Early F‑TYPE X152 | 2013–2015 | Hydraulic power-assisted steering on early applications | Do not order an electric rack until the original system and label are confirmed |
| F‑TYPE X152 with EPAS | 2016–2020 | Electric power-assisted steering standard across the range; RWD/AWD variants | VIN, drivetrain, powertrain and complete GX53/JX53 label |
| Updated F‑TYPE X152 | 2021–2024 | Electric power-assisted steering with later revisions and calibration | Production date, hardware suffix, software and original label photographs |
Compatibility warning: model year or one part number is not enough to guarantee interchange. We confirm supply only after checking the VIN, drivetrain, production date, full suffix and photographs of the original RHD rack.
Jaguar F‑TYPE X152 RHD Electric Steering Rack Part Numbers
The following numbers are identification and cross-reference candidates encountered on applicable units. They are not a promise that every listed rack interchanges.
GX53 RHD family
Cross-reference candidates include GX53-3504-BA/BC/BD/BE/BG and the corresponding GX53-3200 engineering numbers.
JX53 RHD family
Later label groups include JX53-3504-BA/BB/BC/BD and their JX53-3200 equivalents. A similar prefix does not guarantee the same steering ratio, drivetrain or hardware.
Jaguar service-number cross-references
Reported RHD references include T2R29408, T2R46949, T2R54116, T2R81936, T2R27927 and T2R68903. The exact original label and VIN must be checked before supply.
Always record both formats: a rack may show a 3200 engineering number, a 3504 assembly number and a separate Jaguar service number. Every suffix matters.
Common Jaguar F‑TYPE X152 Electric Steering Rack Faults
- Water ingress and internal corrosion
- Loose or damaged motor attachment
- Intermittent or complete loss of assistance
- Heavy steering or warning messages
- Initialisation or software configuration concerns
- Knocking, grinding, groaning or whining
- Mechanical play without a stored code
- Incorrect rack for RWD or AWD application
- Incorrect steering position after installation
- Early hydraulic rack mistaken for later EPAS
A noisy, loose, corroded or mechanically damaged rack may not store a fault code. A warning or communication code can also be caused by low voltage, network, calibration or software problems, so physical inspection and a complete diagnostic scan are both important.
Important F‑TYPE system check
Jaguar’s model-year information states that EPAS became standard across the F‑TYPE range for the 2016 model year. Early hydraulic X152 racks must be diagnosed, repaired and matched as hydraulic units rather than treated as electric racks.
F‑TYPE X152 Fault Codes, Warnings and Correct Diagnosis
Provide the complete code including its suffix and the control module in which it was stored. There is no single universal code that proves the rack has failed across every F‑TYPE X152 year and specification.
Electrical and network checks
Check battery and charging voltage, power and earth supplies, network integrity, PSCM communication and related modules before condemning the rack.
Mechanical and water-damage checks
Inspect for noise, free play, cracking, loose motor attachment, water ingress, corrosion and rack-bar or bearing damage even where the scan report is clear.
How F‑TYPE X152 Rack Repair, Reconditioning and Supply Works
Identify
We check the VIN, year, powertrain, RHD specification, symptoms, codes and original label.
Assess
The rack is inspected for electronics, cracking, corrosion, water damage and mechanical condition.
Repair or Replace
We agree repair or reconditioning where suitable, or quote a correctly matched reconditioned replacement.
Fit and Initialise
Workshop fitting or UK delivery can be arranged. Initialisation, calibration and alignment are checked as required.
Information Needed for an Accurate F‑TYPE X152 EPS Quote
Vehicle details
- Registration or full VIN
- Model year and production date where known
- Engine or powertrain and RWD/AWD specification
- UK right-hand-drive confirmation
Rack and diagnostic details
- Clear photographs of every label and part number
- Exact dashboard warning message
- Complete fault codes, suffixes and control modules
- Description of noise, play, water ingress or loss of assistance
Jaguar F‑TYPE X152 Electric Steering Rack FAQs
Can you repair my original F‑TYPE electric rack?
Often, yes, where the housing, electronics and mechanical condition remain suitable. We assess the rack before repair or reconditioning is confirmed.
Can I buy a reconditioned F‑TYPE EPAS rack?
Yes. We can supply correctly matched RHD reconditioned replacement racks for suitable coupé and convertible applications.
Is every Jaguar F‑TYPE X152 rack electric?
No. Early applications used hydraulic steering. EPAS became standard across the range for the 2016 model year, so the VIN, production date and original rack must be checked.
Does GX53 or JX53 alone confirm compatibility?
No. The complete suffix, RWD/AWD specification, powertrain, steering ratio and original label must be compared.
Will a replacement F‑TYPE rack need coding?
The procedure varies by year and unit. Initialisation, calibration, steering-angle checks and wheel alignment may be required after installation.
Related Jaguar Steering Services
Discuss Your Jaguar F‑TYPE X152 RHD EPS Rack
Send the registration or VIN, complete rack numbers, fault codes and clear photographs so we can identify the correct repair or replacement option.
