Jaguar XE Electric Steering Rack Repair & Reconditioned Racks
Jaguar XE RHD Electric Steering Rack Specialists
Pro Power Steering repairs and reconditions suitable Jaguar XE electric power steering racks and supplies correctly matched reconditioned RHD replacement racks for customers and garages across the UK.
The XE X760 uses several rack families across RWD, AWD, production-date and hardware revisions. Model year alone is not enough: VIN, drivetrain, symptoms, complete diagnostic codes and every number on the original rack must be checked.
Request a Jaguar XE EPS Rack Quote
Send the registration or VIN, model year, engine or powertrain, RHD confirmation, exact dashboard message, complete diagnostic codes including suffixes, and clear photographs of every number on the original steering-rack label.
Jaguar XE X760 RHD Steering Rack Years and Variants
Jaguar introduced the XE with electric power-assisted steering. The practical identification checks include the pre-facelift or facelift vehicle, RWD or AWD specification, production date, hardware suffix and original rack dimensions.
| Vehicle group | Typical UK period | Steering system | Important check |
|---|---|---|---|
| XE X760, original / pre-facelift | 2015–2019 | Electric power-assisted steering; RWD and AWD variants | VIN, drivetrain, full GX/HX/JX label and rack configuration |
| XE X760, facelift | 2020–2024 | Electric power-assisted steering with later hardware/software revisions | Production date, powertrain, software level and complete original label |
Compatibility warning: model year or one part number is not enough to guarantee interchange. We confirm supply only after checking the VIN, drivetrain, production date, full suffix and photographs of the original RHD rack.
Jaguar XE RHD Electric Steering Rack Part Numbers
The following numbers are identification and cross-reference candidates encountered on applicable units. They are not a promise that every listed rack interchanges.
GX73 RHD family
GX73-3504-BE/BF/DA and the corresponding GX73-3200 label numbers are reported with Jaguar references including T4N5900, T4N14717, T4N14889 and T4N15267.
HX73 and JX73 RHD families
HX73-3504-BA/BB/BC and JX73-3504-BB/BC/BD, with matching 3200-format label numbers, are cross-referenced with T4N24545, T4N34214, T4N16951, T4N24710 and T4N34218.
GX63 / HX63 and related variants
Cross-reference candidates include GX63-3504-BF, HX63-3504-BA/BB/BC and related JX/HX label variants. These can differ in rack length, mounting and vehicle application, so a clear full-label photograph is essential.
Always record both formats: a rack may show a 3200 engineering number, a 3504 assembly number and a separate Jaguar service number. Every suffix matters.
Common Jaguar XE Electric Steering Rack Faults
- Water ingress and internal corrosion
- Loose, damaged or sheared motor-retaining bolts
- Intermittent or complete loss of assistance
- Heavy steering at parking speeds
- Power-steering warning messages
- Rattle over rough or damaged roads
- Grinding, groaning or whining while turning
- Mechanical play without a stored code
- Incorrect steering position after replacement
- Initialisation or calibration that will not complete
A noisy, loose, corroded or mechanically damaged rack may not store a fault code. A warning or communication code can also be caused by low voltage, network, calibration or software problems, so physical inspection and a complete diagnostic scan are both important.
Verified Jaguar bulletin example
Jaguar bulletin JTB00458 documents a rattle on a defined group of 2017 XE RWD vehicles at approximately 10–25 mph over rough surfaces, with bearing play inside the electric steering gear identified as the cause. It is a model-year, VIN and market-specific example rather than proof that every XE rattle needs a rack.
XE Fault Codes, Warnings and Correct Diagnosis
Provide the complete code including its suffix and the control module in which it was stored. There is no single universal code that proves the rack has failed across every XE year and specification.
Electrical and network checks
Check battery and charging voltage, power and earth supplies, network integrity, PSCM communication and related modules before condemning the rack.
Mechanical and water-damage checks
Inspect for noise, free play, cracking, loose motor attachment, water ingress, corrosion and rack-bar or bearing damage even where the scan report is clear.
How XE Rack Repair, Reconditioning and Supply Works
Identify
We check the VIN, year, powertrain, RHD specification, symptoms, codes and original label.
Assess
The rack is inspected for electronics, cracking, corrosion, water damage and mechanical condition.
Repair or Replace
We agree repair or reconditioning where suitable, or quote a correctly matched reconditioned replacement.
Fit and Initialise
Workshop fitting or UK delivery can be arranged. Initialisation, calibration and alignment are checked as required.
Information Needed for an Accurate XE EPS Quote
Vehicle details
- Registration or full VIN
- Model year and production date where known
- Engine or powertrain and RWD/AWD specification
- UK right-hand-drive confirmation
Rack and diagnostic details
- Clear photographs of every label and part number
- Exact dashboard warning message
- Complete fault codes, suffixes and control modules
- Description of noise, play, water ingress or loss of assistance
Jaguar XE Electric Steering Rack FAQs
Can you repair my original Jaguar XE rack?
Often, yes, where the housing, electronics and mechanical condition remain suitable. The rack is assessed before repair or reconditioning is confirmed.
Can I buy a reconditioned XE rack?
Yes. We can supply a correctly matched RHD reconditioned replacement for suitable applications, with UK delivery or workshop fitting available.
Does GX73, HX73 or JX73 identify the correct rack?
Not by itself. The complete suffix, VIN, RWD/AWD specification, rack dimensions and original label must be checked.
Can an XE rack be noisy without a fault code?
Yes. Bearing play, corrosion, loose motor attachment or other mechanical wear may be present even where the scan report is clear.
Will the replacement rack require coding?
The exact procedure varies. Initialisation or calibration is commonly required, and steering-angle, ADAS and wheel-alignment checks may also be needed.
Related Jaguar Steering Services
Discuss Your Jaguar XE RHD EPS Rack
Send the registration or VIN, complete rack numbers, fault codes and clear photographs so we can identify the correct repair or replacement option.
