Audi Q7 & SQ7 Electric Steering Rack Repair
Audi Q7 & SQ7 RHD Electric Steering Rack Specialists
Pro Power Steering diagnoses, repairs and reconditions Audi Q7 and SQ7 electric steering racks for private customers, garages, workshops and trade partners across the UK. We can assess the original unit or identify a suitable replacement from the VIN and rack label.
Audi Q7 Generations and Steering Rack Changes
4L — 2006–2015
Earlier hydraulic generation; contact us for hydraulic assessment.
4M — 2015–present
Q7 and SQ7 variants use equipment-dependent electric steering racks. Electric generation with standard/dynamic and assistance-system variants.
Audi Q7 & SQ7 RHD Part Numbers and Rack Families
These complete references are identification guides collected from specialist catalogues. A shared base number does not prove interchangeability: confirm every character on the original label, the VIN, right-hand-drive specification, connector count, PR code and software before supply or fitting.
Q7 4M RHD references
4M2 423 055 J; 4M2 423 055 M; 4M2 423 055 N; 4M2 423 055 R; 4M2 423 055 AA; 4M2 423 055 P; 4M2 423 055 AH; 4M2 423 055 AK; 4M2 423 055 AM; 4M2 423 055 AR; 4M2 423 055 AT; 4M2 423 055 AF; 4M2 423 055 AL; 4M2 423 055 T.
Q7 later MLBevo / related RHD references
4N2 423 053 C; 4N2 423 053 K; 4N2 423 053 L. Active-steering and rear-steering equipment can change identification and calibration requirements.
Standard, Dynamic and Lock-to-Lock Differences
Confirm the original unit before fitting, then complete alignment, steering-angle and end-stop checks.
Safety first: never force an incompatible rack through calibration. The wrong steering type or travel can prevent end-stop learning and leave steering-angle faults.
Common Audi Q7 & SQ7 Electric Steering Faults
Heavy or intermittent steering
Assistance may disappear, return after restarting, or become heavier in one direction.
Warning lights and stored codes
Enquiries include C10AC07, C10ACF0, B200000, 03803 and steering-angle or end-stop faults. Diagnosis is required before condemning the rack.
Noise, play or water ingress
Mechanical wear, corrosion, damaged boots, seals or electronics can cause noise, looseness or unreliable assistance.
Calibration after fitting
Wheel alignment, centred track rods, steering-angle checks and lock-stop learning may be required.
Our Repair and Identification Process
Frequently Asked Questions
Can you identify it from the registration?
It helps, but VIN and rack-label photographs are normally required because mid-year changes are common.
Will it need programming?
Many correctly prepared racks avoid full dealer programming, but some require coding transfer, initialisation or end-stop learning.
Do you serve trade customers?
Yes. Garages, workshops and resellers are welcome, as are private customers.
What warranty applies?
Reconditioned steering work includes a 12-month warranty. For resellers, the start date can reflect documented onward sale or fitment when agreed.
Audi EPS overview · Electric steering rack services · Trade services
Ask About Your Audi Q7 or SQ7 Steering Rack
Send the VIN, registration, fault codes and rack-label photographs for an accurate assessment.
